6" x 10" Floor Register with Damper, Cast Aluminum Modern Linear Vent Cover VR109 - Black
6" x 10" Floor Register with Damper, Cast Aluminum Modern Linear Vent Cover VR109 - Black
SKU:610FRCA-VR109-BLK
Recommended for floors, walls, and ceilings, the VR109 Modern Linear HVAC Register adds a clean, modern look with airflow control. Made from durable cast aluminum, it features straight parallel lines, squared-off edges, and a fine-grain powder-coated finish.Designed for standard drop-in installation, this register can also be used for flush-mount installation when the floor is properly trimmed. The removable damper allows easy airflow adjustment, making it a functional and decorative vent cover for both residential and commercial spaces.
Free in-store pickup at our Mississauga location
Product Information
Product Features & Description
Upgrade your standard vent cover with the VR109 Modern Linear Floor Register. Designed for a 6" x 10" duct opening, this decorative HVAC register features a 8" x 12" faceplate for a clean finished look around the vent opening. The VR109 is made from durable cast aluminum with a solid 5 mm-thick faceplate for long-lasting strength and stability. Its clean, linear pattern of straight parallel lines gives it a modern architectural look, while the squared-off edges help it sit neatly in place. Made for indoor use; walkable in light-traffic areas. This floor register includes an attached adjustable steel damper, allowing smooth airflow control for heating and cooling. The fine-grain powder-coated finish provides a clean, refined appearance and helps protect the surface for everyday indoor use. Dampers are shorter than the duct opening, making them easier to place. Recommended for floors, walls, and ceilings, the VR109 is suitable for residential and commercial spaces alike. It is designed for standard drop-in installation and may also be used for flush-mount installation when the floor is properly trimmed.
- 6" x 10" Floor Register with Damper Cast Aluminum - VR109 Modern Linear Floor Register design vent cover with a 8" x 12" faceplate
- Replace your standard vent cover with the VR109, a cast-aluminum floor register with a clean, Modern Linear pattern.
- With a solid 5 mm faceplate, a rust-resistant powder-coat finish, and an attached adjustable steel damper, it delivers a timeless look and quiet, reliable airflow control.
- The VR109 features a clean, linear pattern of parallel lines, giving it a modern architectural look. The squared-off edges make it suitable for standard drop-in installation or flush-mount installation when the surrounding flooring is properly trimmed.
- The faceplate extends beyond the duct opening to help cover rough cuts, gaps in flooring, and uneven edges. It works well with wood, tile, carpet, vinyl, polished concrete, and most hard flooring surfaces.
Product Features
- Fits standard 6" x 10" duct openings
- 8" x 12" outer faceplate provides extra coverage
- Solid cast aluminum construction
- 5mm-thick faceplate for a premium, durable feel
- Modern Linear Design, VR109
- Includes removable steel damper for airflow control
- Durable powder-coated finish
- Squared edges for drop-in or flush-mount installation
- Suitable for floors, walls, and ceilings
- Designed for residential and commercial HVAC use
Product Specifications
| Product Type | Floor Register / Vent Cover |
|---|---|
| Design | VR109 Modern Linear Design |
| Material | Cast Aluminum |
| Duct Opening Size | 6" x 10" |
| Outer Faceplate Size | 8" x 12" |
| Thickness | 5 mm |
| Damper | Yes |
| Color / Finish | Black, Brown, White, Satin, Gold |
| Installation Use | Floors, Walls, or Ceilings |
Modern Decorative Pattern for Any Room
- The solid faceplate sits 5 mm above floor level for drop-in installation, or trim your flooring for a flush-mounted fit.
- Squared-off edges allow for both installation types.
- The 6" x 10" duct opening fits a 5 mm thick, 8" x 12" faceplate, providing extra coverage.
- Suitable for wood, tile, carpet, polished concrete, and most hard flooring.
- It sits above the floor and does not fully flush without trimming.
- When ordering, specify "For Floors (No Holes)" option For Wall & Celling (With Holes), or choose wall-mounting clips for wall installations as needed.
- Sizing refers to duct opening dimensions.
- The faceplate extends about 1" beyond each side.
-
The VR109 features a clean, linear pattern of parallel lines, giving it a modern architectural look. The squared-off edges make it suitable for standard drop-in installation or flush-mount installation when the surrounding flooring is properly trimmed.
- The faceplate extends beyond the duct opening to help cover rough cuts, gaps in flooring, and uneven edges. It works well with wood, tile, carpet, vinyl, polished concrete, and most hard flooring surfaces.
30-Day Returns: Return eligible items within 30 days of delivery. Items must be unused and in original packaging. Return shipping applies unless the item is damaged or incorrect.
Solid Cast Aluminum - Built for Daily Use
Materials & Finishes
- This floor register is made from solid cast aluminum, not stamped sheet metal or plastic. Its 5mm thick faceplate adds strength, stability, and a premium feel for everyday indoor use.
- Cast aluminum will not rust like steel, making it a reliable choice for long-term use. The baked-on, fine-grain matte powder-coated finish adds extra protection for lasting indoor performance and gives the register a clean, refined look.
- Available in multiple finishes to match different flooring styles and interior decor. The powder-coated surface can also be repainted with metal spray paint for a custom color.
Installation
Floor Installation (No Tools Required)
- Drop directly into the duct opening - no screws or tools required
- The 6" x 10" duct opening fits a 5 mm thick, 8" x 12" faceplate, providing extra coverage.
- For flush mount: trim the flooring to match the 5 mm faceplate thickness first
Wall & Ceiling Installation
- For wall or ceiling installation, select the "For Floors (No Holes)" option For Wall & Celling (With Holes), or choose wall-mounting clips for wall installations.
- Wall-mounting clips are also available for wall installations.
Damper Features & Airflow Control
- The attached steel damper is detachable and allows airflow control.
- The VR109 ships with an attached steel damper that can be adjusted from fully open to fully closed.
- Detachable - remove entirely if airflow control is not required.
- Quiet, rattle-free airflow in the open position.
- The damper can be removed easily from the back of the vent for cleaning or adjustment.
- Dampers are shorter than the duct opening, making them easier to place.
Easy Maintenance
- The register can be removed easily for cleaning, adjustment, or maintenance.
- No special tools are required for routine removal and reinstallation.
Why You'll Love It
Sizing & Fit
- Listed product sizes refer to the duct opening size, not the outside faceplate size. The outer faceplate may extend about 1" or more on each side beyond the duct opening to help cover rough edges and gaps.
- The floor register faceplate sits above the floor surface and does not install fully flush unless the floor is specially trimmed for flush mounting.
- The damper is slightly smaller than the duct opening, making the register easier to place and remove when needed.
- The VR109 design is available as both a floor register with a damper and a matching air-return grille.
Finishes
- 5 mm thick solid cast aluminum faceplate - cast aluminum, not stamped sheet metal or plastic
- Rust- and corrosion-resistant for long-term indoor use
- Materials and Finishes: Made of cast aluminum, these floor registers are rust-free. They come with a baked-on powder coat fine grain matte finish that provides extra protection and can be repainted using metal spray paint to match any decor. Various colors and finishes are available to match any decor.
Warranty
12-month manufacturer's warranty under normal use. The warranty does not cover finish, color, wear, or improper use.
Care Instructions
Clean the register with a soft dry cloth or soft brush. Avoid harsh chemicals, abrasive cleaners, or excessive moisture to help protect the powder-coated finish.Shipping Information
Size Guide Information
Please measure the actual duct opening size instead of the old vent cover or faceplate before placing your order.
Shipping Policy
We provide reliable shipping services across Canada and the U.S.A. using trusted courier partners including UPS, DHL, FedEx, Canada Post, and other available carriers.
FREE SHIPPING on orders over $150.
In-stock products usually ship within 24–48 hours after payment confirmation. Estimated delivery time is typically 5–10 business days depending on location.
Custom-made, backordered, or special-order products may require additional processing time before shipment..
Return and Warranty Policy
We offer a 30-day return policy for eligible items. Products must be returned in original unused condition.
Custom sizes, custom finishes, used, or damaged products may not qualify for returns or exchanges.
Manufacturer’s Warranty: Our floor registers include a 12-month manufacturer warranty under normal residential use. Warranty does not cover finish/color changes, misuse, improper installation, or normal wear and tear.
Downloadable Product Attachment
Download helpful installation guides, fitting references, specifications, and additional product resources below.
Download the complete VR109 floor register specification sheet including faceplate dimensions, duct opening measurements, material information, and installation reference.
Download Specification PDFDownload the floor vent fitting guide showing floor level height, damper positioning, faceplate measurements, and flush mount reference details.
Download Fitting Guide PDFView wall mounting clips and installation accessories for floor vent covers and decorative registers.
View Wall Mounting ClipsView available custom vent cover sizes, finishes, and additional decorative HVAC options for your project requirements.
View Custom Sizes & FinishesFrequently Ask Questions
What size is this register and what does it fit?
This is the VR109 -nominal duct opening 6″ × 10″. The outer faceplate measures 8″ × 12″, so it fits standard 6″×10″ ducts for floors, walls, and ceilings (indoor use).
What material and finishes does the 610FRCA-VR109 come in?
Made from rust-free cast aluminum with a baked-on powder-coat matte finish. Available finishes: Black, Brown, White. It’s repaintable with metal spray paint if you want a custom color.
Does this model include a damper and can it be removed?
Yes -the VR109 ships with pre-attached steel dampers at the back. Dampers are adjustable to control airflow and can be removed easily if required.
How high does the faceplate sit above the floor and will it fit under furniture?
The faceplate sits approximately 7 mm above the floor (plate thickness is 5 mm). It’s low-profile and fits under most furniture; avoid placing heavy sofa legs directly on it to prevent airflow restriction or damage.
How do I measure my vent to ensure the 6″ × 10″ model will fit?
Measure the inside of the duct opening (edge-to-edge) -that’s the nominal size (6″ × 10″). Note: faceplate outer dimensions are roughly 1″ larger per side. Use our “How to Measure” guide if unsure.