Christmas Offer: Save 15% on Selected Products! Use Coupon Code: CHRISTMAS15

Floor Vent Cover / Register Size: 8” x 14” with Damper top faceplate outer size 10″ x 16″, thickness 5 mm, high-quality metal – cast aluminum powder coated Re-paintable for floors, walls, and ceilings – Modern and Contemporary Design (VR 102)

$ 120.0 (CAD)

Christmas Offer: Save 15% Use Coupon Code: CHRISTMAS15

Short Description

  • Beautiful and Durable Floor Registers for Your Home: This Cast Aluminum 8″ X 14″ size fits most Standard air duct opening sizes for floors, walls, and ceilings for Indoor use. These floor registers are hand-crafted and finished. Vent overall top Face Plate Size is 10″ x 16″. The face plate thickness is 5mm.
  • Designs/Pattern: Decorative, Modern, and Contemporary Design comes with a choice of colors and finishes that will add beauty and a rich look to any room of your traditional or contemporary home. These floor registers are hand-crafted and finished, offering a beautiful contrast with your flooring, whether carpet, tile, or wood!
  • Floor Register Sturdiness: Designed to withstand regular, light foot traffic stepping without bending or breaking. Do not put furniture legs on it. The faceplate sits 5 mm above the floor level. It comes with pre-attached detachable Steel dampers at the back to adjust airflow. Dampers can be removed if required.
  • Materials and Finishes: Made of cast aluminum, these floor registers are rust-free. They come with a baked-on powder coat fine grain matte finish that provides extra protection and can be repainted using metal spray paint to match any decor. Various colors and finishes are available to match any decor.
  • Easy to Install: It is easy for any homeowner to install and maintain. Just drop it and insert it into the duct opening of the floor. No tools are required; this 102 Model has beveled edges to blend with any floor as a drop-in register mount. Floor registers can be installed on walls and ceiling; we provide predrilled counter sunk holes and matching screws and select holes or no holes as an option while placing an order. The floor register face plate sits above the Floor surface; it does not flush with the Floor.
  • Versatility and Compatibility: The registers have a 5mm faceplate elevation above the floor. It can be used as a drop-in register mount.
  • Sizing: Listed product sizes refer to the duct opening measurements. The outer dimensions of the cover face plate may be 1″ or longer on each side compared to the duct opening measurements. The floor register faceplate sits above the surface and does not flush with it. VR 102 Design is available for both floor registers and matching air return grills to ensure consistency in design across various ventilation points.
  • Available In Stock: Ships Within 2-4 Business Days from Canada

Important Links-

How to Measure SizesWarranty & SupportQuestions & Answers30 Day Return Policy

Description

Our Cast Aluminum 8 x 14 Floor Register is specially designed for modern homes and comes in four different finishes to fit your home perfectly. They are made of rust-free material that is durable and fit for light-foot traffic (not for heavy traffic). The 8″x 14″ fits most standard air duct openings and blends in with the wall/ceiling/floor with ease due to its beveled edges. They are available with countersunk holes and matching screws. The pre-attached dampers are removable and can be used to control the flow of hot/cold air. Cleaning them is easy. All you need to do is dry brush, and that would be enough. You can also repaint them if you feel the need to.

Long-Lasting Material Used for Cast Aluminum Floor Register

The 8″ x 14″ Floor Register is made of Cast Aluminum as they are rust free and durable. They are designed to withstand light foot traffic without bending or breaking. If required, they can be repainted with metal spray paint available on the market.

Contemporary Design of Cast Aluminum 8″ X 14″ Floor Register

The Contemporary Design Cast Aluminum Floor Register comes with various finishes that provide a fashionable look to modern and traditional homes. They put up a beautiful contrast with the floor/wall/ceiling.

Our Floor Register Available in Multiple Finishes, Colors

Our 8″ x 14″ Cast Aluminum Floor Register is available in four different finishes and colors that will give a beautiful and rich look to contemporary and traditional homes. They are available in Natural Aluminum (Satin), Black Matte, Brown, White finishes which creates a beautiful contrast with the floor/ceiling/wall.

Durable Enough To handle Light Traffic

The Cast Aluminum it is made of is designed to withstand light foot traffic. It is recommended not to place furniture on top of it. Hence, they are perfect for indoor use.

8″ X 14″ Cast Aluminum Floor Register Easy Installation Process

The Cast Aluminum Floor Register is very easy to install and can be done by anyone without the requirement of any tool. They come with countersunk holes and matching screws. They are designed so that they can be just dropped into the air duct opening.

Frequently Asked Questions About Cast Aluminum 8″ x 14″ Floor Register

How to Install This Cast Aluminum 8″ x 14″ Floor Register?

The cast aluminum floor registers (8″ x 14″) are very easy to install. The previously installed Floor Register must be removed, and then the new Floor Register (8″ x 14″) must be just dropped into the vent. There wouldn’t be a need for any tools. This can be done by any homeowner without a problem.

What Are Standard Cast Aluminum Floor Register Sizes?

Standard Register sizes can be anywhere from 2″ x10 ” up to 18″ x 18″. The most common sizes are 4″ x 10″, 4″ x 12″, 6″ x 10″, and 6″ x 12″. Our 8” x 14” Cast Aluminum Floor Register also fits most standard-size air duct openings.

Play Video
Play Video
cast aluminum floor register size 3" x 10" vr102
cast aluminum floor register size 3" x 10" vr102
cast aluminum floor register size 3" x 10" vr102
cast aluminum floor register size 3" x 10" vr102
cast aluminum floor register size 3" x 10" vr102
cast aluminum floor register size 3" x 10" vr102
Weight 2.05 kg
Dimensions 16.5 × 10 × 2.75 in
Finish

Natural Aluminum (Satin), Black Matte, Brown, White

Holes

No Holes, With holes and matching screws

Face Plate

10” x 16”

Thickness

5 mm

Repaintable

Yes

Brand

Prima Decorative Hardware

SKU

814FRCA-VR102-BLK

Part Number

VR-102

Reviews

There are no reviews yet.

Be the first to review “Floor Vent Cover / Register Size: 8” x 14” with Damper top faceplate outer size 10″ x 16″, thickness 5 mm, high-quality metal – cast aluminum powder coated Re-paintable for floors, walls, and ceilings – Modern and Contemporary Design (VR 102)”

Your email address will not be published. Required fields are marked *