Cast Aluminum Floor Register 4x12 VR109 Black

Cast Aluminum Floor Register 4 X 12 VR-109_Black_412FRCA-VR109-BLK-H

Cast Aluminum Floor Register 4 X 12 VR-109_Brown_412FRCA-VR109-BRW

Cast Aluminum Floor Register 4 X 12 VR-109_Brown_412FRCA-VR109-BRW-H

Cast Aluminum Floor Register 4 X 12 VR-109_412FRCA-VR109-BRW_Brown

Cast Aluminum Floor Register 4 X 12 VR-109_White_412FRCA-VR109-WHT.

Cast Aluminum Floor Register 4 X 12 VR-109_White_412FRCA-VR109-WHT-H

Cast Aluminum Floor Register 4x12 VR109 Satin

Cast Aluminum Floor Register 4 X 12 VR-109_Satin_412FRCA-VR109-STN-H

Cast Aluminum Floor Register 4x12 VR109 Black 1

Cast Aluminum Floor Register 4x12 VR109 Black 2

Cast Aluminum Floor Register 4x12 VR109 White

Cast Aluminum Floor Register 4x12 VR109 White 3

Cast Aluminum Floor Register 4x12 VR109 White 2

Cast Aluminum Floor Register 4x12 VR109 Satin 1

Cast Aluminum Floor Register 4x12 VR109 Satin 2

Cast Aluminum Floor Register Size 4″ X 12″ VR109

$ 47.35 (USD)

Replacing or buying new Modern Floor Registers / Vents: – This Cast Aluminum 4″ X 12″ size fits most Standard air ducts opening sizes for floors, walls, and ceilings – Indoor use. It has been designed for floor installations. The Vent cover overall top Faceplate size is 6″ x 14” & is 5 mm thick , are handcrafted and finished
Designs/Pattern: – Our Modern Linear design comes with a choice of colours and finishes that will add beauty and a rich look to any room of your modern, contemporary home. These floor registers offer a beautiful contrast with your flooring whether carpet, tile, or wood! For 109 Model, edges have been squared off, so it can be installed as a drop-in register or a flush mount register. If used as a flush mount floor register, you need to trim your flooring, so that the thickness in your flooring material is the same thickness size as the register faceplate.
Floor Register: We have made from durable sand cast aluminum to hold regular, light foot traffic. Durable, can step on it, will not bend or break the faceplate sits 7 mm above the floor level. Comes with pre-attached detachable Steel dampers at the back to adjust airflow, Dampers can be removed if required. The metal damper controls the airflow direction (to open and close airflow) as per your need
Finishes: The Floor register comes in a variety of finishes to match any décor. It is made of cast aluminum rust-free material, The baked-on powder coat fine-grain matte finish provides extra protection that lasts long, can be re-painted using metal spray paint of any colour to match your décor.
Easy to Install: It is very easy to install and maintain for any homeowner. Just drop it / insert it into the duct opening of the floor. No tools required, Floor registers can be installed on walls and ceiling, we provide pre-drilled countersunk holes and matching screws, just select holes or no holes as an option while placing an order. Floor register face plate sits above the Floor surface, it does not flush with the Floor.
Listed product sizes refer to the duct opening measurements, outer dimensions of the cover faceplate, in most cases are 1″ or more longer on each side/direction.
In Stock: Ships Within 1-4 Business Days from Canada

Warning: California’s Proposition 65

Finish

Holes

Clear

Note:- Free Shipping On orders over CA $150 Throughout Canada Standard Ground Shipping On orders over USD $150 Throughout the USA Standard Ground Shipping Free Self-Pickup from Store (By appointment)

Description

Cast Aluminum Floor Register 4″ X 12″ VR-109

The Prima Decorative Hardware are the elegant Floor Register features high-quality, made of cast aluminum rust-free material. Handcrafted and finished. used to cover floor vent duct openings for AC, Heat & HVAC systems. Our floor registers are ideal for your home in all areas. It will provide a decent look to your home. You will fall in love with this gorgeous floor register cover. Our design delivers a modern look and ensures rattle free and quiet heat or cool airflow from your central air system to the room while providing easy opening and closing with attached dampers at the back. Our Handcrafted and hand-finished 4″ X 12″ size fits most Standard air ducts opening sizes for floors, walls, and ceilings and are for indoor use. Made from durable sand cast aluminum to hold regular, light foot traffic. Durable, can step on it, will not bend or break Do not put furniture legs on it. Not recommended for heavy traffic walk-on. The material which is used is durable cast aluminum . The damper is removable and adjustable to control airflow and make it safe. Our Floor registers are made beautifully and built to last long. These floor registers will add a touch of modern elegance to any room for a long duration. Cleaning the floor register is very easy. All our floor registers are powder coated and are durable. It can be cleaned by just brushing dry, if after a few years you see any colour difference or get dull or want to change the colour you can get them re-painted using metal paint spray available in the market. For 109 Model, edges have been squared off, so it can be installed as a drop-in register or a flush mount register. If used as a flush mount floor register, you need to trim your flooring, so that the thickness in your flooring material is the same thickness as the register faceplate or you may need to add some packing underneath the register to make it flush with the flooring level.

Manufacturer’s Warranty – Our registers come with a 12-month warranty under normal use by the buyer (does not cover finish/colour), normal wear and tear or improper use/installation.

Finish: Black Matte, White, Brown, Satin Gold and Satin (Natural Aluminum)

Fits in Duct Opening Size: 4″ X 12″

Vent Overall Face Plate Size: 6″x14″

Face plate thickness 5mm

Material: Cast Aluminum

Shipping charges extra.

Important Links-