Cast Aluminum Floor Register Size 3″ X 10″ VR109 Pack of 2

$ 81.09$ 83.30 (USD)

  • Replacing or buying new Modern Floor Registers / Vents: – This Cast Aluminum 3″ X 10″ size fits most Standard air duct opening sizes for floors, walls, and ceilings – Indoor use. It has been designed for floor installations. The Vent cover overall top Faceplate size is 12″x5″ & is 5 mm thick, handcrafted, and finished.
  • Designs/Pattern: – Our Modern Linear design comes with a choice of colors and finishes that will add beauty and a rich look to any modern, contemporary homeroom. These floor registers contrast beautifully with your carpet, tile, or wood flooring! For the 109 Model, the edges have been squared off, so it can be installed as a drop-in register or a flush mount register. If used as a flush mount floor register, you need to trim your flooring so that the thickness of your flooring material is the same size as the register faceplate.
  • Floor Register: We have made from durable sand-cast aluminum to hold regular, light foot traffic. It is durable, can be stepped on, and will not bend or break. The faceplate sits 7 mm above the floor level. It comes with pre-attached detachable Steel dampers at the back to adjust airflow; dampers can be removed if required. The metal damper controls the direction of airflow (to open and close airflow) as per your need.
  • Finishes: The Floor register comes in various finishes to match any décor. It is made of cast aluminum rust-free material; the baked-on powder coat fine-grain matte finish provides extra protection that lasts long and can be re-painted using metal spray paint of any color to match your décor.
  • Easy to Install: It is easy for any homeowner to install and maintain. Just drop it / insert it into the duct opening of the floor. No tools are required; floor registers can be installed on walls and ceiling; we provide pre-drilled countersunk holes and matching screws; select holes or no holes as an option while placing an order. The floor register face plate sits above the Floor surface; it does not flush with the Floor.
  • Sizing: Listed product sizes refer to the duct opening measurements. The outer dimensions of the cover face plate may be 1″ or longer on each side compared to the duct opening measurements. The floor register faceplate sits above the surface and does not flush with it. VR 109 Design is available for both floor registers and matching air return grills to ensure consistency in design across various ventilation points.
  • Available In Stock: Ships within 2-4 Business Days from Canada
  • See Product Specifications
  • Floor Register
Facebook
Pinterest
Twitter
Loading...

Description

The Prima Decorative Hardware are the elegant Floor Register features high-quality, made of cast aluminum  rust-free material. Handcrafted and finished. used to cover floor vent duct openings for AC, Heat & HVAC systems. Our floor registers are ideal for your home in all areas. It will provide a decent look to your home. You will fall in love with this gorgeous floor register cover. Our design delivers a modern look and ensures rattle free and quiet heat or cool airflow from your central air system to the room while providing easy opening and closing with attached dampers at the back. Our Handcrafted and hand-finished 3″ X 10″ size fits most Standard air ducts opening sizes for floors, walls, and ceilings and are for indoor use. Made from durable sand cast aluminum to hold regular, light foot traffic. Durable, can step on it, will not bend or break Do not put furniture legs on it. Not recommended for heavy traffic walk-on. The material which is used is durable cast aluminum . The damper is removable and adjustable to control airflow and make it safe. Our Floor registers are made beautifully and built to last long. These floor registers will add a touch of modern elegance to any room for a long duration. Cleaning the floor register is very easy. All our floor registers are powder coated and are durable. It can be cleaned by just brushing dry, if after a few years you see any colour difference or get dull or want to change the colour you can get them re-painted using metal paint spray available in the market. For 109 Model, edges have been squared off, so it can be installed as a drop-in register or a flush mount register. If used as a flush mount floor register, you need to trim your flooring, so that the thickness in your flooring material is the same thickness as the register faceplate or you may need to add some packing underneath the register to make it flush with the flooring level.Manufacturer’s Warranty – Our registers come with a 12-month warranty under normal use by the buyer (does not cover finish/colour), normal wear and tear or improper use/installation.Finish: Black Matte, White, Brown, Satin Gold and Satin (Natural Aluminum)Fits in Duct Opening Size: 3″ X 10″Vent Overall Face Plate Size: 12″x5″                                                                                                           tFace plate thickness 5mmMaterial:  Cast AluminumHow to remove and re-fix Metal dampers from back of Floor RegistersShipping charges extra.Important Links-How to Measure SizesWarranty & SupportQuestions & Answers30 Day Return Policy
Play Video
Play Video
Cast Aluminum Floor Regsiters 1
Cast Aluminum Floor Regsiters 2
Cast Aluminum Floor Regsiters 3
3x10 floor vent cover,odd size floor registers,Aluminum floor registers White,3 x 10 floor register,Brown floor register 3 x 10,Modern Linear Design Floor Register,HVAC Vent cover,Heat Vent Cover,Hand crafted and sand cast material,Durable Sand Cast Aluminum,Black Powder Coated Matte Flat Finish Registers,3x10 floor register,brown floor register,floor vent covers,Floor vent,Metal floor vents,vent cover 3x10,home decor,Floor vent Canada,floor vents register,Re paintable,floor register,floor vents,floor register covers,floor grates,vent registers,heat register covers,heat registers,metal floor registers,register vent covers,floor air vents,floor grate cover,decor grates floor register,black floor registers,floor grille,floor air vent covers,floor heat registers,floor vent registers,decorative floor registers,black floor vents,modern floor registers,custom floor registers,floor heating vents,replacing old heat registers,modern floor vents,floor register fan,decorative floor vent covers
Cast Aluminum Floor Regsiters 5
Cast Aluminum Floor Regsiters 6

Additional information

Weight0.74 kg
Dimensions31.75 × 13.97 × 6.35 in
Finish

Black, Satin, Brown, White

Holes

No Holes, With holes and matching screws

Reviews

There are no reviews yet.

Be the first to review “Cast Aluminum Floor Register Size 3″ X 10″ VR109 Pack of 2”

Your email address will not be published. Required fields are marked *

Blog and News