8″ X 14″ Cast Aluminum Floor Register for Indoor Use [VR-109]

$ 120.0 (CAD)

  • Replacing or buying new Modern Floor Registers / Vents: – This Cast Aluminum 8″ X 14″ size fits most Standard air duct opening sizes for floors, walls, and ceilings – Indoor use. It has been designed for floor installations. The Vent cover overall top Faceplate size is 9½” X 16″ & is 5 mm thick, handcrafted, and finished.
  • Designs/Pattern: – Our Modern Linear design comes with a choice of colors and finishes that will add beauty and a rich look to any modern, contemporary homeroom. These floor registers contrast beautifully with your carpet, tile, or wood flooring! For the 109 Model, the edges have been squared off, so it can be installed as a drop-in register or a flush mount register. If used as a flush mount floor register, you need to trim your flooring so that the thickness of your flooring material is the same size as the register faceplate.
  • Floor Register: We have made from durable sand-cast aluminum to hold regular, light foot traffic. It is durable, can be stepped on, and will not bend or break. The faceplate sits 7 mm above the floor level. It comes with pre-attached detachable Steel dampers at the back to adjust airflow; dampers can be removed if required. The metal damper controls the direction of airflow (to open and close airflow) as per your need.
  • Finishes: The Floor register comes in various finishes to match any décor. It is made of cast aluminum rust-free material; the baked-on powder coat fine-grain matte finish provides extra protection that lasts long and can be re-painted using metal spray paint of any color to match your décor.
  • Easy to Install: It is easy for any homeowner to install and maintain. Just drop it / insert it into the duct opening of the floor. No tools are required; floor registers can be installed on walls and ceiling; we provide pre-drilled countersunk holes and matching screws; select holes or no holes as an option while placing an order. The floor register face plate sits above the Floor surface; it does not flush with the Floor.
  • Sizing: Listed product sizes refer to the duct opening measurements. The outer dimensions of the cover face plate may be 1″ or longer on each side compared to the duct opening measurements. The floor register faceplate sits above the surface and does not flush with it. VR 109 Design is available for both floor registers and matching air return grills to ensure consistency in design across various ventilation points.
  • Available In Stock: Ships within 2-4 Business Days from Canada
  • See Product Specifications
  • Floor Register
Facebook
Pinterest
Twitter
Loading...

Description

8″ x 14″ Cast Aluminum Floor Register Product Description

Our elegant 8″ x 14″ cast aluminum floor register is handcrafted with rust free aluminum to last long. It comes with a removable damper that controls the flow of warm and cold air to maintain the desired room temperature. The 8″ x 14″ floor registers come in four finishes that will add style to your home. Cleaning the 8″ x 14″ aluminum register with a dry brush would be enough and can be easily installed by anyone.

Pre-Attached Removable Damper in Cast Aluminum Floor Registers

The Cast Aluminum floor register comes with dampers that can be removed if required. The dampers help to control the direction of the air flow of hot/cold air in and out of the room and help to maintain the desired temperature indoors.

Various Finishes and Colors of 8″ x 14″ Aluminum Register

The 8″ x 14″ Cast Aluminum Floor Register is available in four different finishes that give every home a rich look. The four finishes are – Natural Aluminum (Satin), Black Matte, Brown, White. The floor registers will put up a brilliant contrast with the floor/ceiling/wall.

Easy Installation of 8″ x 14″ Floor Register

This elegant 8″ x 14″ cast aluminum floor register is quite easy to install and can be done by any homeowner. All one needs to do is to drop the floor register in the air duct opening and that is it. However, if required the floor registers are also available with countersunk holes and matching screws.

Linear Design Floor Register of Cast Aluminum Floor Registers

The Linear design of the 8″ x 14″ cast aluminum floor register gives a rich look to the home and puts a brilliant contrast with the wall/floor/ceiling. The floor registers are also available in Natural Aluminum (Satin), Black Matte, Brown, White finishes for perfect fit.

Frequently Asked Questions About Cast Aluminum Floor Register (8″x 14″)

What Is the Perfect Size of Floor Register for Your 9½” x 16″ Face Plate?

The 8″ x 14″ Floor Register can be easily installed. To do that, the previously installed floor register must be taken out and then the new floor register can be just dropped in. It does not require any tool and can be done by anyone without a hassle.

How To Install This 8″x 14″ Floor Register?

It is very easy to install a Floor Register. It can be done by any homeowner. The 8″ x 14″ cast aluminum floor register can be installed in most standard sized air duct openings. Although, before doing that, the previously installed floor register must be removed and then, with the help of the dimensions of the air duct opening, the right sized floor register must be chosen. To install the floor register, it only needs to be dropped into the air duct opening and it’s all done.

Cast Aluminum Floor Registers

How to Remove Damper from back of Floor Registers

Cast Aluminum Floor Regsiters 1
Cast Aluminum Floor Regsiters 2
Cast Aluminum Floor Regsiters 3
Floor Register,Cast aluminum floor,Metal floor register,8x14 floor register,Vent 8x14,Floor vent covers,Metal floor vents,Floor vent Canada,HVAC vent,Heat vents Cover,Air vent cover,Antique vent cover,Duct vent,Metal registers,8x14 VR102
Cast Aluminum Floor Regsiters 5
Cast Aluminum Floor Regsiters 6

Additional information

Weight2.05 kg
Dimensions16.5 × 10 × 2.75 in
Dimension

41.91 × 25.4 × 6.98 cm

Face Plate

9½” x 16”

Thickness

5 mm

Weight

2.05 KG

Finish

Natural Aluminum (Satin), Black Matte, Brown, White

Holes

No Holes, With Holes and matching screws

Repaintable

Yes

SKU

814FRCA-VR109

Brand

Prima Decorative Hardware

Part No.

VR-109

Reviews

There are no reviews yet.

Be the first to review “8″ X 14″ Cast Aluminum Floor Register for Indoor Use [VR-109]”

Your email address will not be published. Required fields are marked *

Blog and News