Short Description

Replacing or buying new Modern Floor Registers / Vents: - This Cast Aluminum 4″ X 10″ size fits most Standard air duct opening sizes for floors, walls, and ceilings – Indoor use. It has been designed for floor installations. The Vent cover overall top Faceplate size is 6″ x 12” & is 5 mm thick, handcrafted, and finished.
Designs/Pattern: - Our Modern Linear design comes with a choice of colors and finishes that will add beauty and a rich look to any modern, contemporary homeroom. These floor registers contrast beautifully with your carpet, tile, or wood flooring! For the 109 Model, the edges have been squared off, so it can be installed as a drop-in register or a flush mount register. If used as a flush mount floor register, you need to trim your flooring so that the thickness of your flooring material is the same size as the register faceplate.
Floor Register: We have made from durable sand-cast aluminum to hold regular, light foot traffic. It is durable, can be stepped on, and will not bend or break. The faceplate sits 7 mm above the floor level. It comes with pre-attached detachable Steel dampers at the back to adjust airflow; dampers can be removed if required. The metal damper controls the direction of airflow (to open and close airflow) as per your need.
Finishes: The Floor register comes in various finishes to match any décor. It is made of cast aluminum rust-free material; the baked-on powder coat fine-grain matte finish provides extra protection that lasts long and can be re-painted using metal spray paint of any color to match your décor.
Easy to Install: It is easy for any homeowner to install and maintain. Just drop it / insert it into the duct opening of the floor. No tools are required; floor registers can be installed on walls and ceiling; we provide pre-drilled countersunk holes and matching screws; select holes or no holes as an option while placing an order. The floor register face plate sits above the Floor surface; it does not flush with the Floor.
Sizing: Listed product sizes refer to the duct opening measurements. The outer dimensions of the cover face plate may be 1" or longer on each side compared to the duct opening measurements. The floor register faceplate sits above the surface and does not flush with it. VR 109 Design is available for both floor registers and matching air return grills to ensure consistency in design across various ventilation points.

Description

The Prima Decorative Hardware are the elegant Floor Register features high-quality, made of cast aluminum rust free material. Handcrafted and finished. used to cover floor vent duct openings for AC, Heat & HVAC systems.

Our design delivers a modern look and ensures rattle free and quiet heat or cool air flow from your central air system to the room, while providing easy opening and closing with attached dampers at the back.

Our Hand crafted and hand finished 4" X 10" size fits most standard air ducts opening sizes for floors, walls, and ceilings and are for indoor use. Not recommended for heavy traffic walk-on. The material which has used that is durable cast aluminum . The damper is removable and adjustable to control air flow and make it safe. Our Floor registers are made beautifully and built to last long.

These floor registers will add a touch of modern elegance to any room for long duration. Cleaning of the floor register is very easy. All our floor registers are powder coated and are durable. It can be cleaned by just brushing dry, if after few years you see any colour difference or gets dull or want to change colour you can get them re-painted using metal paint spray available in market.

Manufacturer’s Warranty – Our registers come with 12-month warranty under normal use by the buyer (does not cover finish/colour), normal wear and tear or improper use/installation.

Color / Finishes Available: Brushed Gold

Cast Aluminum Floor Regsiters 1